Rifle Racks - Locking Wall Rifle & Shotgun Rack

These rifle display racks provides locking shotgun & rifle storage for homes, police, gun store display, etc.

Locking Shotgun - Rifle Rack for 9 Guns

For most all types of rifles and shotguns with standard stocks or all stocks having similar length

Individual stall dimensions:
2-1/2" wide x 2-3/4" deep

wall rifle rack mouned to wall

rifle display rack with guns locked in place

	This 9 gun rifle display rack and the 3 gun rack shown below, can also be mounted inside a display cabinet and used as a gun cabinet rack (see photo on left) to deter gun theft while on display. The display cabinet would require a minimum interior width of 32 inches to mount one 9 - gun rack and a minimum depth of 12 inches for the locking bar to swing outward to remove the guns. More width would be needed to mount more of these rifle holders.	Optional Mounting Both gun racks shown mounted in a Armoire display cabinet. (See 3 - gun rack below)

(See above for the 9 - gun rifle / shotgun rack)

Locking Rifle Rack for 3 Guns

Back to home page of our other Gun Racks

Model # 101
$49.95 (Plus S & H)

This rifle and shotgun rack offers locking gun storage for up to 3 firearms with or without scopes, in or out of gun socks. It has the similar features as the nine gun rack shown above. It mounts approximately 12 inches above the floor or a strong shelf. It is very securely fasten to a single wall framing stud with a 3/8" x 2-1/2" hex head screw and screw head protector guard that prohibits screw removal. Only 12 inches of wall space (width) is required for mounting. This is enough space for the locking bar to swing outward to retrieve all firearms. If no wall stud is available at the desired mounting place, a 2" x 4" board can be securely attached horizontal to the wall for mounting. For mounting two of these gun racks in a display cabinet, a minimum width of 24 inches and a depth of 12 inches are needed.

(See Photo Above of This Gun Rack Mounted in a Gun Cabinet)

	For most all types rifles and shotguns with standard stocks Measurements: Lower Section (with locking bar in place): 10-1/2" Length x 8-1/4 " Depth x 2" Height Barrel Rest Section: 1/2" x 3" x 8-1/2" Barrel Rest From Wall: Approximately 3 inches Height From Floor To Top Of Lower Section: 13-1/4 inches Height From Lower Section To Barrel Rest: 14 inches Height From Floor To Top Of Barrel Rest: 27 inches Weight: 5 lbs. Padlock Not Included (Recommend a High Security Shackle Padlock - Maximum Cut Resistance)

These gun storage racks are made of steel and coated to protect all guns. Their narrow profile allows them to be easily mounted, preferably in closets for secure gun rack storage. They will lock up most all types of long guns including some military rifles that have equal length stocks. The butts of the guns rest on the floor or can be mounted on a sturdy shelf above the floor if desired.

The locking bar slides through the two holes (one on each side of the frame). It locks in the smallest section of the each gun's stock ( handgrip area ) with a padlock (not furnished) for lockable gun storage. The firearms are locked in place in narrow stalls preventing them from being pulled out. To retrieve them, the locking bar can be pulled completely out of the two holes or in narrow places with limited wall space, it can be pulled out of one hole enough for it to swing outward. The "L" shaped curve at one end of the locking bar allows the bar to swing outward.

The barrel rest attaches to the lower section's mounting screws and to the wall with support bars (single bar for the 3 rifle holder). The barrel rest also separates each rifle's barrel in individual stalls to protect them from marring.

Once installed, the barrel rest stands away from the wall approximately 3 inches to also accommodate most rifles that have taller sights at the end of the barrel (as well as standard hunting rifles and shotguns). There are two round screw head guards included that can be tapped over the screw heads to keep the racks from unauthorized removal once the firearms are locked inside. It can also be mounted above the floor on a sturdy shelf if necessary. Trigger locks can also be used when firearms are locked up for extra safety if desired.